We are leading manufacturer and exporter of Drum Heating Oven and our product is made up of good quality.

KERONE is having more than 40 years experience in designing manufacturing of industrial Oven.

Drum Heating Oven is also used to prevent substances from freezing within the drum or solidifying.

Drum Heating Ovens systems are designed and produced with careful attention to detail and a mindset to quality and accuracy.

Drum spinning system is available to guarantee uniform heat appropriation with most extreme temperature to 400°c.

The heating zone length of drum heating ovens fluctuate from 3 meters to 6 meters, inches width from 4 meters to 9 meters and procedure time range from 10 minutes to 30 minutes.

We offer both gas-let go models electrically heated models.

Features:-

• Different Sizes
• Easy to install
• Customized

Instructions:-

• Power: Electronic
• Usage: Hot air dry drum heating ovens
• Interior Chamber Material: SS 304 Stainless Steel Plate
• Temperature Control Accuracy:+/-0.3 Degrees
• Temperature Range: Room Temperature +10 Degrees to +200 Degrees
• Controller: Omron E5AZ Controller
• Wind System: Sirocco Fan

Kerone' is known for delivering both quality and performance in its products that comprise both standard and customer specific electrical tubular heaters, electric tubular heaters, electric infrared heaters so as to meet the operational demands of industrial and domestic usage as per defined national and international standards

We are leading manufacturer and exporter of Industrial Heating Oven and our product is made up of good quality.

KERONE is having more than 40 years experience in designing, manufacturing, erection and commissioning various type of Industrial Heating Oven. 

Since the process of drying is very time and energy consuming process therefore KERONE offer economical, energy efficient, advanced technology dryer that can fit in both budget and process of the requirement of client. 

Features:-

• Exhaust fan
• Powered exhaust
• Recirculation fan
• Direct fired burners
• Flame safety controller
• Automatic purge timers
• Duct distribution system
• Ceiling mounted burner box
• Digital temperature controller
• Double doors for handling large substrates

We are leading manufacturer and exporter of Electric Oven for HT LT Motors and our product is made up of good quality.

KERONE is having more than 40 years experience in designing, manufacturing, erection and commissioning various type of HT/LT Generators and Motors, the process needs special type of drying and cooling solution for the hassle free and smooth operation of the HT/LT Generators and Motors manufacturing to help the clients with the type specialized need we at KERONE designed one of the most reliable and economical solutions. 

The ovens designed for the HT/LT Motor drying is one of its kind and suitable for the various kind of application need, the oven is having designed and build to meet the process need and longer easy maintainable life. 

Features:-

• Longer serviceable years
• User-friendly control panel
• Low and easy maintenance
• Opaque construction
• Speedy and Easy installation
• Correctly designed and engineered
• Hassle-free functioning
• Longer service life
• Strong construction
• High durability
• Energy and Cost efficient
• High Power Saving
• Efficient performance

Kerone' is known for delivering both quality and performance in its products that comprise both standard and customer specific electrical tubular heaters, electric tubular heaters, electric infrared heaters so as to meet the operational demands of industrial and domestic usage as per defined national and international standards

LUBE OIL BLENDING DRUM OVEN designed and provided by KERONE are used for processing numerous grades of automotive and industrial lubricants. We set these plants in tailor made format to fulfill the several requisites of clients. In this plant the base oil and the numerous additives and blended under hot/ cold condition depending upon the grade of oil being formulated. Finally the filling of finished lube oils into containers of various sizes are carried out. This plant is provided as a totally automatic batch process with the assistance of load cells and PLC – SCADA control system.

We are leading manufacturer and exporter of Drying Oven and our product is made up of good quality.

KERONE is having more than 40 years experience in designing, manufacturing, erection and commissioning various type of industrial oven. 

Our drying ovens are used for drying, heating, aging, sterilizing, testing, curing and storing. 

From small to very large capacity of chamber volume. 
Standard applications with fixed value control or high demand for program control. 

Back heating with horizontal air circulation or bottom heating with vertical air circulation. 

Applications:-

• Automotive battery plates
• Ceramic
• Fibre
• Food
• Mould drying
• Paint Coatings
• Polymer sheets
• Post-wash component drying
• Pyrotechnics and explosives
• Textiles

Features:-

• Stainless Steel Materials In Inner Space
• Thermal Insulation Of Composite Boards Of High Thermal Resistance
• Electric Or Gas-heated, Direct Or Indirect Heating
• Multi-zone Temperature Control
• Controlled Ventilation In Compliance With Humidity
• Controlled Cooling
• Control Systems: Pid Programmable Microprocessor Controllers, Programmable Logic Controllers (plc) Including Processing Software Made-to-measure
• Batch Loading Tools, Trolleys

We are leading manufacturer and exporter of Reflow Ovens and our product is made up of good quality.

KERONE is having more than 40 years experience in designing manufacturing Reflow Ovens. 

A reflow oven is a machine used primarily for reflow soldering of surface mount electronic components to printed circuit boards (PCB).

Advantages:-

• Low cost. Low power results in lower initial start-up costs, as well as running costs.
• Low power consumption.
• Highly insulated cool cover.
• Easy maintenance.
• Light compact.

Instructions:-

• Type: Reflow Solder
• Usage: uninterrupted soldering the LED and BGA components
• Voltage: AC 220V/380V
• Weight:175kgs
• Dimensions:150*90*65cm
• Rated Duty Cycle:2 - 8 Min
• Rated Capacity:4500w

Kerone' is known for delivering both quality and performance in its products that comprise both standard and customer specific electrical tubular heaters, electric tubular heaters, electric infrared heaters so as to meet the operational demands of industrial and domestic usage as per defined national and international standards

We are leading manufacturer and exporter of Baking Ovens and our product is made up of good quality.

KERONE is a pioneer in providing heating systems for the various needs of the processing and manufacturing of industrial baking ovens in batch and conveyor configurations. 

KERONE is having more than 40 years experience in designing manufacturing industrial baking Oven. 

Baking is the process of heating a material surface to a low temperature in order to remove the entrained gases. 

This method of baking is used for finishing products with heat.

Advantages:-

• Fast product changeover
• Continuous production
• Reduced waste
• Energy saving technology
• Minimum manual input
• High fuel-efficient
• Low installation cost

Instructions:-

• Condition:New
• Usage:Biscuit
• Type:Wafer Baking Oven, rotary oven,Convection oven , hot plate oven , steam oven ,
• Power Source:Electric
• Voltage:380V, 3N 380V 50Hz
• Power(W):4800
• Weight:1300KG
• Dimension(L*W*H):1900*1800*2300mm

Kerone' is known for delivering both quality and performance in its products that comprise both standard and customer specific electrical tubular heaters, electric tubular heaters, electric infrared heaters so as to meet the operational demands of industrial and domestic usage as per defined national and international standards

We are leading manufacturer and exporter of Plastic Annealing Oven and our product is made up of good quality.

KERONE is a pioneer in providing heating systems for the various needs of the processing and manufacturing of Plastic and Plastic articles.

Due to the scarcity of metal and wood the plastic has become a major substitute for them for various applications.

In multiple applications plastics needs to demonstrate a higher degree of toughness and strength, to achieve the desired toughness the stress present within the various corpuscles bonds must be removed.

This process of removal of stress plastic is known as Annealing.

Advantages:-

• Increase in speed of the heating process.
• Lower-cost of energy.
• Intensity adjustments are easy for different products.
• Infrared heater installation is simpler and maintenance cost is lower.
• Infrared Plastic annealing ovens do not produce residual.
• An infrared Plastic annealing heater is more cost effective and requires lesser floor space.

We are leading manufacturer and exporter of Curing Oven and our product is made up of good quality.

KERONE is having more than 40 years experience in designing, manufacturing, erection and commissioning various type of industrial oven, the process needs special type of drying and cooling solution for the hassle free and smooth operation of the Curing Oven manufacturing to help the clients with the type specialized need we at KERONE designed one of the most reliable and economical solution. 

Curing oven can be used for a number of processes including composite curing, powder coating, drying, and more. 

Kerone curing ovens are considered best for preheating, curing various coats and drying parts and components. 

Advantages:-

• Increase in speed of the heating process.
• Lower-cost of energy.
• Intensity adjustments are easy for different products.
• Electric, natural gas, or LPG ovens available
• Each oven is shipped assembled
• Every oven is factory tested
• Separate heating control contactors (electric ovens)
• Digital batch timer with interlock system