We are leading manufacturer and exporter of Curtain Coating Systems and our product is made up of good quality.
Curtain coating in the slide (single- and multi-layer) or slot (single-layer only) format is being increasingly used for special paper coatings because of its capabilities: copious simultaneous layers, high coating speed, and large die-to-web clearance.
The advantages of the pre-metered methods associated with simultaneous multi-layer application yield a more accurate and uniform coating weight, with fresher and cleaner coated liquids.
These advantages lead to big savings in production costs because of less coating color consumption, less production runs due to multi-layer capability and less machine stops due to web breaks and in the end to higher efficiency compared to the established coating methods.
Advantages:-
Speed: This system can coat from 3,000 to 4,000 pieces per hour.
Minimum personnel required.
Virtually no waste: Since the small amount of unused coating is cycled back into the system, this method wastes less coating than any other.
Aesthetics: The only non-spray process that imparts a smooth, glossy finish, with no track marks.
Flexibility: Disks can be as thin or as thick as specifications require.
We are leading manufacturer and exporter of Hot Melt Coating Machine and our product is made up of good quality.
Hot melt coating machine can apply to non-woven fabric, paper, and various plastic films.
The machine consists of two auto splicing and unwinding units, one glue sprinkling unit and one auto splicing and unwinding unit, so that it can process on two layers material and one layer coating.
The machine with PLC to do the linking control and auto splicing device can raise the producing efficiency.
Advantages:-
Environmentally friendly due to water and solvent-free adhesives
We are leading manufacturer and exporter of Fabric Coating Machine and our product is made up of good quality.
To enhance and strengthen the fabrics, taps, textile products, and other flexible substrates, it is mandate that some type of the coating and lamination required, coating helps the industrial products to achieve the desired level of strength, surface tension, look and feel and improve the durability.
KERONE since last 40 years, with its engineering excellence helping the industries for their need of coating and laminating machinery for the tape, fabric, textile products, and other flexible substances with a deep level of the customization.
Fabric coating systems utilize any from the below coating techniques:-
Hot melt Coating Systems
Slot Die Coating Machine
Reverse Roll Coating Machine
Knife Over Roll Coating and immersion/dip coating.
We design build fabric coating systems to offer following features:-
Perfect uniform coating across the whole width
Vibration free rigid doctor blade construction
Special arrangement to set very fine gap across the width
Quick lifting system
Micro adjustment individual and together left / right
Knife on-air arrangement
Dual knife system with option of thin /thick coating
We are leading manufacturer and exporter of Gravure Coating Systems and our product is made up of good quality.
KERONE is leading name to help its clients with their unique and accurate need of heating and drying systems, we design and build the various types of the dryers for critical as well as specialized needs.
In our list of the products we also provide the solution for the gravure coating mechanics with our specialized dryer, we also call them gravure coating dryers.
The specialized and custom developed gravure coating dryer’s uses very efficient and critical drying mechanism which helps in achieving the accurate and faster results.
Gravure Coating dryers are having the ability to dry the cost of both solvent-less coating and water/solvent-based coating.
The dryers are manufactured to work with both the offset type as well as the direct type of gravure coating machines.
Features:-
Independent precise coating control for top bottom
Installed to coat 24 to 30 gsm on top 15 to 18 gsm bottom
Reciprocating scrappers for uniform distribution
Hydraulic lift of complete top frame for bypassing the coater and passing threading bar
All six drives with VFD (coating rolls, top bottom smoothening distribution)
Web control at entry may be installed
Pneumatically operated smoothing rolls distribution bar
We are leading manufacturer and exporter of Reverse Roll Coating Machine and our product is made up of good quality.
KERONE is the well-known name for providing quality and highly efficient roller dryer for the various needs of coating and impregnation plants.
The roller dryer is also known as drum dryer.
The roller dryer consists of a hollow roller with a smooth exterior heated inside out.
It rotates on its longitudinal axis. In roller dryer rotates on its longitudinal axis which is a heated roller, this metal roller is utilized to plunge in the solution to be dried.
Features:-
AC frequency drive and Control panel for variable speed
Compatible rubber rollers for UV coating
Aqueous base coating
Noiseless operation
Instructions:-
Condition: New
Type: Coating Production Line
Substrate: Iron
Coating: Powder Coating
Voltage: Specially customized as clients' local power
Power(W): Customized
Dimension(L*W*H): Customized upon workpiece and client's requirements
We are leading manufacturer and exporter of Spray Coating Machine and our product is made up of good quality.
At KERONE, we hold the expertise in designing and manufacturing of custom build spray coating for the varying needs of the customer, every single spray dryers designed by us, is known for its performance, efficiency and lower maintenance cost.
Application:-
Food: milk powder, coffee, tea, eggs, cereal, spices, flavorings, starch and starch derivatives, vitamins, enzymes, Stevie, colorings etc.
Pharmaceutical: antibiotics, medical ingredients, additives
We are leading manufacturer and exporter of DIP Coating Systems and our product is made up of good quality.
At KERONE, we hold the expertise in designing and manufacturing of custom build immersion/Dip Coating systems, which are available in free-standing floor or tabletop models, are specifically designed for production applications that do not require large in-line systems.
Our coating systems can be used to apply a range of coatings, as well as photo-resists and solder masks, that are part of printed circuit board applications all with a level of precision that manufacturer's demand.
Advantages:-
Dip coating gives a defensive shield that opposes consumption.
Insulates against warmth, frosty, stress and electrical streams.
Adaptable to high volume requests obliging quick conveyance.
Durable and UV safe.
Alternative hues and completions (reflexive and matt) can be made effortlessly and financially.
Commercial scale coating or complete coating line is highly productive having ability to handle complex coating needs. KERONE’s commercial scale (complete) coating line helps in accommodating specialized requirement of customization, each system is design and nurtured by team of experts having more than 40 years of knowledge along with dedicated team to support which make us completely reliable and customer friendly company.
With our coating solution help our client to be step ahead from time for technical advancement, our commercial scale (complete scale) coating lines are well known for below features:
Simplified and easy to operate but very effective control system
Lesser or minimum human interface, automated completely
Precisely build machinery after all calculation so that accurate repeatability is achieved
Technically advance implementation to offer long term committed performance
Wastage control mechanism, to avoid wastage of coating chemical or material
Thickness control with exact level of tolerance
Additional Information:
Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
